SAN | Pendant Light E27 & E26 fast print

Meet SAN, a 3-pieces pendant, perfect as an accent light or as a dining room pendant.

It comes in 3 sizes:
The large one has a diameter of 256mm.
The small one has a diameter of 208mm.
The mini one has a diameter of 176mm.

Each size comes in 2 versions:
- a “fast print” version with a 0.5mm weave (1 wall line)
- a “strong” version with a 0.9mm weave (2 wall lines with 0.4mm nozzle)
You can mix and match the two if you want.

Any 3D printer can print it without exceptional print settings and a regular 0.4mm nozzle.
You can also go with a 0.8mm nozzle and print in vase mode.

Some of you will wonder why the ring for the light bulbe in the middle of the top section looks like two half-circles interlocking each other.
The reason isn't mechanical, but I designed it this way to have a continuous inner loop, so a cleaner first layer and faster print.
The printer doesn't have to create several loops and jump between them, leaving blobs and causing printing issues.
Instead, the inner loop is all uninterrupted and will give you a much cleaner and faster first layer.

Happy printing!

DIMENSIONS (Large) | Ø 256 mm
DIMENSIONS (Small) | Ø 208 mm
DIMENSIONS (Mini) | Ø 176 mm
Total height (assembled) is about 200mm, but each part is less than 70mm tall.