A 3d scanned rock wall shelf with a face that is only visible from a certain angle.

The shelf comes in two sizes with a holder each. There is an extra holder included that you can scale up if you want to print it bigger.
You can either screw or glue the holder onto your wall. There are various glue or tape products for wall fixation out there. I used 3M Tape. Old fashioned screws and dowels are the most reliable fixation. The screw holes have a diameter of 5.5 mm



Size big: 90 x 161 x 186 mm
Size small: 67 x 121 x 140 mm