top of page

Modular hanging planter

3D print design by

Gazzaladra Design

A modular hanging planter that you can customize for your needs.

Customization options
Size: All files are provided in 90, 100, 110 and 120 mm diameter, so 4 sizes in total. They are compatible with each other.
Length: The chain length can be picked freely; one segment adds about 50 mm
Mounting: The mounting options are 4 hooks in size 20, 30, 40 and 50 mm, a wall mount or ceiling mount. You can mount them with screws or wall mount tape. The diameter of the two screw holes is 5,5 mm
Evaporation: The bottom can be printed closed or with ventilation holes, so the excess water can evaporate.
Self-watering: You can add a self-watering wick to both bottom options to reabsorb the excess water. The central hole is 5mm in diameter while the other holes are 4mm. This allows for a wick between 3 and 6 mm in diameter.
Simple serial mounting: You can add a second chain to the bottom to add another planter, works best with self-watering setups.
Serial mounting and serial watering: By using the Connector Handle, you directly add more pots below and have the water drip into the next one. Only the lowest Planter has a bottom.
Comfort serial mounting: By using the single handle and two short chains between planters, you add more space to add a bottom to each of them. Best suited for serial mounting if you frequently want to empty the bottoms, keep the water flow separate and not use self-watering wicks.

Overall, it depends on the strength of your prints how many planters you can mount in series. With normal PLA prints I would not add more than 5 plants to a single chain.

Instructions
Check out all of the options above and plan your hanging garden. Since this is highly modular, you can always adjust it later.
Print all parts according to the settings below.
If you intend on using self-watering wicks, place them, and make sure that they can reach the bottom of the saucers.
Add your soil and plants.
Add your handles, they click in place. If your printer messed up a bit, use a screwdriver or similarly shaped object to click them in.
Pace your mounting and add the entire chain. Place the planter assembly last.

Get commercial license with

Hive+(Private)

Print & Sell this Design with HivePlus

mano 3.jpg

Only 100 Licenses

Full commercial access with limited global sellers.

0001-0250.gif

HQ Media Content

Media library of images, videos, and written content.

Screenshot 2024-11-06 at 14.58.24.png

1:1 Collaboration

Personal support access to a private seller community

Cubee Learning Center.png

3D-Biz Support

Expert content & live sessions to help you grow.

Anchor 1 - plans

Join 

HivePlus

  • 1 Exclusive catalog of your choice

  • Only 100 HivePlus licenses globally

  • Rights to sell across any platform

  • Content bank of pics & vids

  • Biz-dev consultancy & sales data

  • +1,800 STL Library (HiveCommunity)

*With CubeeTrust:

A royalty system that rewards and motivates your designers by sharing 10% of sales with them

Only 100 Spots Per Catalog

Get 33% OFF with Quarterly Plan

Need access to ALL designer catalogs?

Print & Sell this Design & +1,800 more

40+ New Designs Every Month

Instantly access the full HiveCommunity STL library

Choose your Plan

Don’t miss special year-end price!

*Prices are in USD

How Does HiveCommunity Work?

bottom of page