A modular drawer divider suited for many different use cases. You can configure the parts to fit your needs and drawers perfectly. The parts are fast to print and use very little material.
The connectors of the dividers can hold up to 4 parts and you can create every possible compartment composition. The connectors to not add to leigh so measuring what parts you need is quite easy.

How it works
Measure your drawer and make a little sketch of the size and setup of parts you want to print (I included a showcase sketch in the pictures)
Find out which height you want to use (either 11 or 8 cm)
Make a list of the parts you need (available parts can be found below)
Print the parts and for every connection point two of the connectors
Assemble the parts and connectors and place them in your drawer
If you have an odd size like 40.5 cm – use extra connectors at the end of your assembly to add to length below two centimeters

List of parts (height x width)
H8W2
H8W3
H8W4
H8W5
H8W7
H8W10
H8W15
H8W20

H11W2
H11W3
H11W4
H11W5
H11W7
H11W10
H11W15
H11W20

Universal Connector