top of page


MagSafe Desk Clamp: Desk Edge Charging Stand
3D print design by
Collecticraft
My phone charges on the edge of the desk, and the desk stays empty. The MagSafe Desk Clamp is a plate that holds an Apple MagSafe charger flush, carried by a 3D printed clamp that hooks onto the desk edge. The cable runs inside, two screws hide under the charger, and there's no glue.
Wood in the Photos, PLA in the Files:
The plate in my photos is wood: I carved it on my CNC. You don't need one. The 3MF has the same plate ready to print, with the same pocket, cable slot and screw holes, and I recommend printing it in PLA. It takes about 43 minutes, and the whole stand comes off your printer.
What You Need to Buy:
• Apple MagSafe Charger: One, the round charger with its USB-C cable.
• M5×12 Screws with a Low Head: Two, head Ø9.4 × 1.4 mm, so they hide under the charger. You can find them as add-on parts in the Bambu Lab store.
• M5 Heat-Set Inserts: Two.
Highlights:
• Charger Sits Flush: The MagSafe charger sits level with the plate.
• Hidden Cable: Through the plate and down a tunnel in the clamp. The USB-C plug fits through.
• Hidden Screws, No Glue: Two M5 screws under the charger. Everything comes apart.
• Fits Most Desks: Desk tops from about 8 to 30 mm thick, with the plate tilted 20° back.
• Portrait or Landscape: The phone snaps on upright or sideways.
Version 2.1:
This stand fought me twice. The first plate was 80 mm wide and my iPhone's camera bump hit it, so version 2 has a 64 mm plate. Then the pad that snaps onto the ball tip of the screw wobbled under the desk. In version 2.1 ball and seat share the same nominal size, Ø11.7 mm, and the PLA shrink gives just the right play: the pad snaps on, levels itself and stays put.
Clamp it to your desk, snap your phone on, and keep the top of the desk clear.
Get commercial license with
HiveCommunity
Print & Sell this Design with HivePlus

Only 100 Licenses
Full commercial access with limited global sellers.

HQ Media Content
Media library of images, videos, and written content.

1:1 Collaboration
Personal support access to a private seller community

3D-Biz Support
Expert content & live sessions to help you grow.
Anchor 1 - plans
Join
HivePlus
-
1 Exclusive catalog of your choice
-
Only 100 HivePlus licenses globally
-
Rights to sell across any platform
-
Content bank of pics & vids
-
Biz-dev consultancy & sales data
-
2K+ STL Library (HiveCommunity)
*With CubeeTrust:
A royalty system that rewards and motivates your designers by sharing 10% of sales with them
bottom of page









































.png)


