top of page

Adjustable Wooden Floor Lamp

3D print design by

Collecticraft

Light up your home with a floor lamp built from five wooden dowels and a handful of printed parts. Two joints do all the work: a low hub that opens into the tripod, and a sliding joint that carries the upper arm and locks wherever you decide the light belongs. The shade hangs from that arm on the cable itself, printed in vase mode so the bulb reads as a warm, even surface instead of a bright point.

Design & Concept
I designed this lamp around its two joints and let standard material do the rest. The frame is nothing but 30mm wooden dowels, the kind any hardware shop will cut to length, and every connection between them is printed: the tripod hub at the bottom, the cross joint that slides along the central column, six printed screws that clamp the rods in place, and a set of internal pins that shim each seat so nothing rattles. Two of the six end caps carry a groove, so the cable seats into them and follows the frame instead of hanging across it. Height and reach are not decisions the model makes for you, they are decisions you make after the build and can change again whenever the room changes. The shade is the counterweight to all that structure, printed in vase mode, quiet and soft against the pale wood.

Hardware Required:
Wooden Dowels: 5 rods, 30mm diameter. Three of equal length for the legs, one for the central column, one shorter for the arm, all cut to length.
Electrical: A 7mm cable, an E27 socket, an inline switch, and a mains plug.
Bulb: E27, warm white recommended.


Assembly
Print the lower hub, the sliding upper joint, the six rod end caps (four plain and two grooved for the cable), the six printed screws, the internal pins, the two shades, and the shade cap.
Cut the five 30mm wooden roods: three legs, one central column, one shorter arm.
Seat the legs and the central column in the lower hub, shimming the rods with the internal pins, and lock them with the printed screws.
Slide the upper joint onto the column, pass the short arm through it, and tighten the screws at the height and reach you want.
Close the free rod ends with the caps, placing the two grooved ones at the top of the column and at the end of the arm, then seat the cable into those grooves.
Fit the socket into the shade cap and hang the shade.


Download the Adjustable Wooden Floor Lamp today and set it to the corner it has to light. I'd love to see how tall you build yours.

Get commercial license with

HiveCommunity

Print & Sell this Design with HivePlus

mano 3.jpg

Only 100 Licenses

Full commercial access with limited global sellers.

0001-0250.gif

HQ Media Content

Media library of images, videos, and written content.

Screenshot 2024-11-06 at 14.58.24.png

1:1 Collaboration

Personal support access to a private seller community

Cubee Learning Center.png

3D-Biz Support

Expert content & live sessions to help you grow.

Anchor 1 - plans

Join 

HivePlus

  • 1 Exclusive catalog of your choice

  • Only 100 HivePlus licenses globally

  • Rights to sell across any platform

  • Content bank of pics & vids

  • Biz-dev consultancy & sales data

  • 2K+ STL Library (HiveCommunity)

*With CubeeTrust:

A royalty system that rewards and motivates your designers by sharing 10% of sales with them

Only 100 Spots Per Catalog

Get 33% OFF with Quarterly Plan

Need access to ALL designer catalogs?

Print & Sell this Design & 2K+ more

40+ New Designs Every Month

Instantly access the full HiveCommunity STL library

Choose your Plan

Don’t miss special year-end price!

Monthly

$15

/Month

Billed monthly • Cancel anytime

Yearly

$10

/Month

Billed yearly at $120

LifeTime

$199

/Single-payment

Billed Once • Access Forever

Only 199 Seats

*Prices are in USD

How Does HiveCommunity Work?

Untitled design (28).png

1

We partnered with some of the world's most talented designers
1.png

2

Every month they upload designs to the HiveCommunity catalog.
3.png

3

You get access to the catalog + commercial rights to sell the prints.
2.png

4

Designer compensation is distributed depending on your usage.
bottom of page