A beautiful and easy to craft wall lamp sculped after a old oak branch (Quercus Robur).

What you need
The 3d printed parts
A lamp kit including a plug, cord, switch, socket and bulb – available cheaply online and in your local hardware store
A little glue
Wall fixation: Either screws and dowels, wall mount tape or wall mount glue. Old fashioned screws and dowels are the most reliable fixation.

Included parts
Body: The Branch
Holder: the holder with a screw-hole diameter of 5.5mm
Clip_6_0.1: The cable clip for a maximum cord diameter of 6 mm and a clearance of 0.1 mm for quite accurate printers
Clip_6_0.2: The cable clip for a maximum cord diameter of 6 mm and a clearance of 0.2 mm for messier printers
Clip_8_0.1: The cable clip for a maximum cord diameter of 8 mm and a clearance of 0.1 mm for quite accurate printers
Clip_8_0.2: The cable clip for a maximum cord diameter of 8 mm and a clearance of 0.2 mm for messier printers

Instructions
Measure the diameter of your cord and choose your clip accordingly - print it twice
Print the body and holder
Glue the clips into the Body - check the images for orientation!
Mount the holder with your chosen wall mount product
Insert the cable through the base clip, wrap it around the branch and plug it into the branch clip.
Insert the lamp onto the holder
Enjoy your new lamp!