Raily - a simple rail system for wall organization. Especially suited for Kitchen and Workspace but functional in the entire household.
All parts are quick and easy to print and serve a variety of use cases. Simply place some rails wherever you need them and keep expanding and reorganizing your storage.

If you have ideas for more parts let me know!

Parts
Rails: 3 sizes from 100 to 300 mm. 100 mm long end pieces are also included for a cleaner look
Boxes: 20 sizes ranging from 40 x 40 x 40 mm to 100 x 100 x 100 mm
Hook: 1 size
Knob: 5 sizes from 10 mm to 50 mm in length
Block: 10 sizes with either no slit, a 4 or 8 mm slit, in the depth of either 40 or 60 mm, both as single and triple element
Hole: 3 sizes with a diameter of 12, 16 and 20 mm

Instructions:
All parts are rotated correctly, do not rotate them to a different print orientation
Print and place your rails, pay attention that there is enough space on one side to slide the parts on. You can either screw or glue them onto your wall. I like to use 3M tape. The screw holes have a diameter of 5.5 mm, and they are always 100 mm apart.
Many parts like the boxes require the “insert”, a little extra piece that you insert into the back with a little force. This way no parts requires support!
Print whichever parts you need and slide them on from the side
You can reconfigure and extend the wall swiftly.