This bundle of wall shelfs is a highly naturalistic replica of real “trametes pubescens” that I found and 3d-scanned. Include are two compositions in real life size as shelfs and each of the seven individual mushrooms to be used as extra décor.

Versions
Trametes_pubescens_shelf_A and _B: The shelves
Trametes_pubescens_shelf_no_holder_A and _B: The shelves without the cut-out intended for scaling down – must be mounted with glue or tape.
Trametes_pubescens_shelf_A_large: The shelf in a bigger version to match the size of the other wall shelves.
Trametes_pubescens_holder: the holder with a screw-hole diameter of 5.5mm
Trametes_pubescens_holder_for_upscaling: If you want a huge version, scale up the shelf_A_large and use this holder – the only difference is the screw-hole size of 3mm that will be usable when scaled.
Trametes_pubescens_individual_1 – 7: The mushrooms individually - must be mounted with glue or tape.

Instructions
Print the shelf and holder
You can either screw or glue it onto your wall. There are various glue or tape products for wall fixation out there. I used 3M Tape. Old fashioned screws and dowels are the most reliable fixation.
Insert the shelf by moving it horizontally onto the holder until the holder is completely inside the cutout. Then proceed to move the shelf down and the holder locks.
Enjoy!