Beautiful drawer handles inspired by the famous “Amanta Muscaria”.
You can mix and match all three heads and stems.

Single and multi-color printing models are included as STL and 3MF! They work with all current and usual multi color setups.

What you need
The prints
Glue
Flat head M4 screws. The screws can be inserted into the print up to 10 mm. Choose your length by adding 5 -10 mm onto your drawer front thickness. M4x25 is the most common drawer handle screw size.
M4 Hex Nuts (according to DIN934)

Instructions
Print all parts
Insert the hex nut into one side of the stem
Apply glue and Press on the other side
Apply glue to the top connector part and press the head on
Insert the screw into your drawer from the back and attach the mushroom from the front.
Tighten the screw until the mushroom sits firm.